Star Wars Stormtrooper Helmet | Tag | prop

Master Replicas 11 Scale Stormtrooper Helmet Limited Edition Movie Prop Replica

Posted on September 27, 2016 by admin

For sale Master Replicas Stormtrooper Helmet Limited Edition 1:1 Scale Movie Prop Replica, ultra low number 0022 of 2500, beautiful condition, shiny white, no yellowing or scratches. There is what looks like a very small surface scuff around 3mm x 1mm in size near the bottom on the right lower cheek in front of the ear by the rubber trim and a similar mark on the other side behind the ear near the rubber trim. These are very small dull marks in the glossy surface, not the paint and not noticeable. They won’t even show up in photographs. They look like they might have been made when the ears were fitted. Displayed for a short while in a smoke-free home, in a glass cabinet. Switch out green and smoked grey lenses. All paperwork, certificate card and envelope. Display stand with number plaque. Original printed box with styrene (no brown shipper) otherwise in good order. Limited edition print unopened with certificate (only available with first 300 pcs). Don’t miss out on this chance to own a very low numbered replica in fantastic condition. The item “Master Replicas 11 Scale Stormtrooper Helmet Limited Edition Movie Prop Replica” is in sale since Monday, September 26, 2016. This item is in the category “Collectables\Science Fiction\Star Wars\Other Star Wars”. The seller is “indianaandrews” and is located in Birmingham, West Midlands. This item can be shipped worldwide.

Series/ Genre: Star Wars
Sub-Type: Star Wars (1977)
Brand: Master Replicas
Item: Prop Replica

Star Wars Storm Trooper Costume Armor Life Size Movie Helmet Prop

Posted on September 24, 2016 by admin

STAR WARS 1:1 STORMTROOPER LIFE SIZE MOVIE HELMET COSTUME ARMOR PROP. Star Wars – Stormtrooper Armor. (will fit a 5’5″ to 6’2″ up to 200 lbs person) Armor are made of hand laid fiberglass with a gel coat exterior, sanded to a super smooth finish and is painted with automotive paint. Fiberglass is made by combining resin with woven glass mat that is then hand laid and sculpted into the desired shapes. ABS plastic is not as tough as fiberglass, and if it cracked or damaged, repairs are difficult, costly, and rarely return the plastic to its original state. Fiberglass, however, is not only more durable than ABS, but repairs to it can also be easily completed by almost anyone. Scale 1:1, Movie Size. Full Set Armor is painted with automotive paint (assembly needed). Neck Seal, Gun, Gloves, Boots, and the Holster are not included. Assembly instruction is not included. The item “STAR WARS STORM TROOPER COSTUME ARMOR LIFE SIZE MOVIE HELMET PROP” is in sale since Saturday, September 24, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “buus783″ and is located in DALLAS, TX. This item can be shipped worldwide.

Custom Efx Star Wars A New Hope Stormtrooper Costume Helmet Painted Replica Prop

Posted on September 21, 2016 by admin

E spend many hours, u. Tilise high quality paints and apply multiple layers to achieve the desired effects for each project. We also apply protective lacquer over the finished products; however it is recommended that our items be used for indoor display purposes only. Any moving parts such as loading mechanisms may wear away the paintwork. CUSTOM EFX STAR WARS A NEW HOPE STORMTROOPER COSTUME HELMET PAINTED REPLICA PROP. Originally an Official Licensed EFX Storm Trooper. Makes the perfect foundation for custom painting. Our unique extreme storm exposure weathering effects. Fresh from the battlefield from which this Storm trooper fought to the last man. Colour scheme is based on and inspired by the STAR WARS STORMTROOPER CHARACTER. Finished with protective matt lacquer. This helmet is fully functional, comes complete as brand new with original box and packaging and will arrive ready to wear. Custom weathered to look as realistic as possible. It will arrive protected in bubble wrap and would make the perfect cosplay prop, display piece or gift. The item you receive will be the item displayed in the photos. The item “CUSTOM EFX STAR WARS A NEW HOPE STORMTROOPER COSTUME HELMET PAINTED REPLICA PROP” is in sale since Monday, September 19, 2016. This item is in the category “Collectables\Science Fiction\Star Wars\Other Star Wars”. The seller is “flymypretties6985″ and is located in Basildon, Essex. This item can be shipped to United Kingdom, to Austria, to Belgium, BG, HR, CY, CZ, DK, FI, to France, to Germany, GR, HU, to Ireland, to Italy, LT, LU, MT, to Netherlands, PL, PT, RO, SK, SI, to Spain, SE, to Australia, to United States, RU, to Canada, to Japan, to New Zealand, to China, IL, to Hong Kong, NO, ID, MY, to Mexico, SG, KR, to Switzerland, to Taiwan, TH.

Series/ Genre: Star Wars
Sub-Type: Star Wars (1977)
Brand: EFX

Star Wars Storm Trooper Costume Armor Life Size Movie Helmet Prop

Posted on September 18, 2016 by admin

STAR WARS 1:1 STORMTROOPER LIFE SIZE MOVIE HELMET COSTUME ARMOR PROP. Star Wars – Stormtrooper Armor. (will fit a 5’5″ to 6’2″ up to 200 lbs person) Armor are made of hand laid fiberglass with a gel coat exterior, sanded to a super smooth finish and is painted with automotive paint. Fiberglass is made by combining resin with woven glass mat that is then hand laid and sculpted into the desired shapes. ABS plastic is not as tough as fiberglass, and if it cracked or damaged, repairs are difficult, costly, and rarely return the plastic to its original state. Fiberglass, however, is not only more durable than ABS, but repairs to it can also be easily completed by almost anyone. Scale 1:1, Movie Size. Full Set Armor is painted with automotive paint (assembly needed). Neck Seal, Gun, Gloves, Boots, and the Holster are not included. Assembly instruction is not included. The item “STAR WARS STORM TROOPER COSTUME ARMOR LIFE SIZE MOVIE HELMET PROP” is in sale since Saturday, September 17, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “buus783″ and is located in DALLAS, TX. This item can be shipped worldwide.

Star Wars Storm Trooper Costume Armor Life Size Movie Helmet Prop

Posted on September 15, 2016 by admin

STAR WARS 1:1 STORMTROOPER LIFE SIZE MOVIE HELMET COSTUME ARMOR PROP. Star Wars – Stormtrooper Armor. (will fit a 5’5″ to 6’2″ up to 200 lbs person) Armor are made of hand laid fiberglass with a gel coat exterior, sanded to a super smooth finish and is painted with automotive paint. Fiberglass is made by combining resin with woven glass mat that is then hand laid and sculpted into the desired shapes. ABS plastic is not as tough as fiberglass, and if it cracked or damaged, repairs are difficult, costly, and rarely return the plastic to its original state. Fiberglass, however, is not only more durable than ABS, but repairs to it can also be easily completed by almost anyone. Scale 1:1, Movie Size. Full Set Armor is painted with automotive paint (assembly needed). Neck Seal, Gun, Gloves, Boots, and the Holster are not included. Assembly instruction is not included. The item “STAR WARS STORM TROOPER COSTUME ARMOR LIFE SIZE MOVIE HELMET PROP” is in sale since Thursday, September 15, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “buus783″ and is located in DALLAS, TX. This item can be shipped worldwide.

Star Wars Storm Trooper Costume Armor Life Size Movie Helmet Prop

Posted on September 13, 2016 by admin

STAR WARS 1:1 STORMTROOPER LIFE SIZE MOVIE HELMET COSTUME ARMOR PROP. Star Wars – Stormtrooper Armor. (will fit a 5’5″ to 6’2″ up to 200 lbs person) Armor are made of hand laid fiberglass with a gel coat exterior, sanded to a super smooth finish and is painted with automotive paint. Fiberglass is made by combining resin with woven glass mat that is then hand laid and sculpted into the desired shapes. ABS plastic is not as tough as fiberglass, and if it cracked or damaged, repairs are difficult, costly, and rarely return the plastic to its original state. Fiberglass, however, is not only more durable than ABS, but repairs to it can also be easily completed by almost anyone. Scale 1:1, Movie Size. Full Set Armor is painted with automotive paint (assembly needed). Neck Seal, Gun, Gloves, Boots, and the Holster are not included. Assembly instruction is not included. The item “STAR WARS STORM TROOPER COSTUME ARMOR LIFE SIZE MOVIE HELMET PROP” is in sale since Monday, September 12, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “buus783″ and is located in DALLAS, TX. This item can be shipped worldwide.

Star Wars Fn-2187 Stormtrooper Helmet Ultimate Studio Edition 11 Prop Replica

Posted on September 12, 2016 by admin

This Is Ultimate Studio Edition Finn’s Stormtrooper Helmet from Star Wars: The Force Awakens. They are LIMITED EDITION OF 500. Replica of Finns Stormtrooper Helmet from Star Wars: The Force Awakens. Featuring the bloody handprint that triggers Finns defection to the Resistance, this iconic helmet of soldier FN-2187 is precisely detailed in every way and appears virtually identical to the prop worn by the actor. Created using the original 3D digital data from the actual FN-2187 Stormtrooper Helmet featured in the film in combination with advanced digital manufacturing processes, and then hand-finished by a highly skilled artisan. The original blood marking has been laser scanned and projected onto this helmet, and a special paint effect process has been applied to identically recreate the surface texture pattern. Made of a composition of 3D printing materials, forged items, and cast items. Includes a chip to authenticate the serial number that is printed on the Certificate of Authenticity. Delivered in an exclusive, custom wooden crate inspired by the packaging used for the original prop. Limited Edition of 500. Certificate of Authenticity and Authenticity Medallion included. 40 L x 30 W x 50cm H. Product weight with stand: 3365g. Product weight without stand: 1165g. This is not a toy. It is not meant to be worn as a costume, and does not contain any moving parts. The item “Star Wars Fn-2187 Stormtrooper Helmet Ultimate Studio Edition 11 Prop Replica” is in sale since Friday, September 09, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\IV\Star Wars”. The seller is “czb2jenny” and is located in North Scituate, Rhode Island. This item can be shipped to United States.

Star Wars Prop Ep 7 Force Awaken Battle Damage Stormtrooper armor helmet adult

Posted on September 9, 2016 by admin

STAR WARS 1:1 STORMTROOPER LIFE SIZE MOVIE HELMET COSTUME ARMOR PROP. Star Wars Prop Episode 7 Force Awaken Stormtrooper armor helmet for adult wearer. Stormtropper Battle Damage Helmet. Fully Painted With Automotive Paint. All Our Product Constructed Of High Quality Hand Laid Fiberglass. The item “Star Wars Prop Ep 7 Force Awaken Battle Damage Stormtrooper armor helmet adult” is in sale since Friday, September 09, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “buus783″ and is located in DALLAS, TX. This item can be shipped worldwide.

Efx 11 Scale Star Wars Stormtrooper Prop Replica Helmet Collectible Set

Posted on September 6, 2016 by admin

1:1 SCALE COLLECTIBLE. 1:1 scale prop replica from STAR WARS EPISODE IV: A NEW HOPE. Adult owned, helmet is. In excellent condition, b. Riefly displayed in a smoke free home inside of a glass display case. Complete set with certificate of authenticity. Thank you for looking. Otherwise will be retracted. The item “EFX 11 SCALE STAR WARS STORMTROOPER PROP REPLICA HELMET COLLECTIBLE SET” is in sale since Saturday, September 03, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Costumes, Masks”. The seller is “deep2space” and is located in Vancouver, British Columbia. This item can be shipped to United States.

Star Wars Stormtrooper First Order Finn FN-2187 Traitor Helmet Prop Replica

Posted on September 5, 2016 by admin

Prop no light or sound effects.. ! Is made of high impact styrene. Perfect for your Star Wars Room or form make Cosplay at a Con!! Note This is a custom made product involving hundreds of hours to finish so imperfections do exist and are unavoidable. The item “Star Wars Stormtrooper First Order Finn FN-2187 Traitor Helmet Prop Replica” is in sale since Monday, September 05, 2016. This item is in the category “Collectibles\Science Fiction & Horror\Star Wars\Products, Non-Film Specific\Other Star Wars Collectibles”. The seller is “jcsmonkeys” and is located in Miami, Florida. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.

Country/Region of Manufacture: Japan

‹ Prev 1 … 60 61 62 63 64 … 67 Next ›

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30